Sailing
displays the current speed, gps position, course and heeling of your boat as provided by the GPS of your phone. To switch the display between km/h, m/s and kt press and hold the number showing the speed.
Navigation
Does the same as Sailing and aditionally shows your current postion at the open-sea-map.
Tracking
allows you to store the geocordes as well as the speed and course of your trip.
There are two modes, "regatta"-mode regularry takes a waypoint every few seconds - which leads to a lot of data - while "cruising" only stores values when things have changes. For details see "Help".
Trackings runs in the background even if the app itself is no longer visible.
Recorded tracks are displayed at the open-sea-map and may be exportet to gpx, csv and jpg-image.
Regatta
provides a regatta start countdown. Long tab at the time display to set the countdown time. After countdown the display switches to the Sailing view.
Anchor Alert
reports by sound and light signal if your boat reaches a configurable distance from your anchor position. Press long on the distance-display to set the alarm ringtone. The alarm distance can be set by pressing the smaller "Change" button at the bottom. The anchor alarm starts by clicking the "Start", stops by "Stop".
Warning: The anchor alert does not replace the deck guard. It must only be used supportive. Apart from hardware limitations of your device also the Android operating system can interrupt background processes as anchor alarm is. This will prevent Anchor Alert from working as expected.
Limitation of Liability:
The software and your documentation is provided "as is" without guarantee for function, correctness or accuracy. For any direct or indirect damage - in particular damage to other software, hardware damage, damage from loss of use and damage from inoperability of the software, the author can not be held responsible. Only the user is liable for the consequences of using this software. This software was designed with the utmost care, however errors can never be excluded. Therefore, it can not guarantee your safety or the safety of your data.
Navegación
muestra la velocidad actual, la posición gps, el rumbo y el escorado de su embarcación según lo provisto por el GPS de su teléfono. Para cambiar la visualización entre km / h, m / sy kt, mantenga presionado el número que muestra la velocidad.
Navegación
Hace lo mismo que Navegar y muestra de manera adicional su posición actual en el mapa de mar abierto.
Rastreo
le permite almacenar los geocordes, así como la velocidad y el curso de su viaje.
Hay dos modos, el modo regular "regatta" toma un waypoint cada pocos segundos, lo que genera una gran cantidad de datos, mientras que "crucero" solo almacena valores cuando las cosas cambian. Para más detalles, vea "Ayuda".
El seguimiento se ejecuta en segundo plano, incluso si la aplicación ya no es visible.
Las pistas grabadas se muestran en el mapa de mar abierto y pueden exportarse a gpx, csv y jpg-image.
Regata
proporciona una cuenta regresiva de inicio de la regata. Pestaña larga en la pantalla de tiempo para establecer el tiempo de cuenta regresiva. Después de la cuenta atrás, la pantalla cambia a la vista Navegación.
Alerta de anclaje
informa por sonido y luz si su barco alcanza una distancia configurable desde su posición de anclaje. Presione prolongadamente en la pantalla de distancia para configurar el tono de llamada de la alarma. La distancia de la alarma se puede configurar presionando el botón "Cambiar" más pequeño en la parte inferior. La alarma de anclaje comienza haciendo clic en "Inicio", se detiene en "Parar".
Advertencia: la alerta de anclaje no reemplaza la protección de la plataforma. Solo debe ser usado como apoyo. Además de las limitaciones de hardware de su dispositivo, también el sistema operativo Android puede interrumpir los procesos en segundo plano como lo es la alarma de anclaje. Esto evitará que Anchor Alert funcione como se esperaba.
Limitación de responsabilidad:
El software y su documentación se proporcionan "tal cual" sin garantía de funcionamiento, corrección o precisión. Para cualquier daño directo o indirecto - en particular daño a otro software, daño de hardware, daño por pérdida de uso y daño por inoperatibilidad del software, el autor no puede ser considerado responsable. Solo el usuario es responsable de las consecuencias de usar este software. Este software fue diseñado con sumo cuidado, sin embargo, los errores nunca pueden ser excluidos. Por lo tanto, no puede garantizar su seguridad o la seguridad de sus datos.